After installing a jacuzzi in my deck, I noticed that some visible mold spots were appearing on my tongue and groove ceiling. A sight that I wasn’t a fan of. So it got me wondering, how to remove mold from tongue and groove pine ceiling?
So, after extensive research and gathering user experience, here’s what I found.
You can remove molds from the tongue and groove pine ceiling with a few easy steps using the right kind of cleaning solution and scrubbing it in the right places.
But if you are a first-timer like me, the process can be a bit confusing for you.
But don’t worry we got your back. To make this mold removal process easier for you we broke it down into five easy steps that you can follow to make your ceiling mold-free.
So if you are interested to know how to remove mold from your wooden ceiling, then keep on reading.
Ready? Let’s get started.
Before You Begin
Before you dive into the steps to remove mold from the tongue and groove pine ceiling, there are a few safety precautions that you need to follow to make sure that nothing harms you and the process is done smoothly.
1. You must wear proper safety gear before you start removing mold. Mold spots inhibit hundreds of fungal spores that will be released into the air rapidly when you will remove them. If you don’t have proper safety gear on then it will irritate your eyes, respiratory system, and skin if you are sensitive.
Put on the below-mentioned safety gear before you start with the mold removal process.
A) Protective gloves
B) Protective glasses and face mask or
C) Full face respiratory mask
D) Full sleeve top for sensitive skin
2. Don’t work during windy days. Mold spots have hundreds of spores that will be released into the air when you sad them or scrub them. If the weather is windy those spores will float around and might infect other wooden furniture you may have around.
3. If you need some kind of support to reach the ceiling, then make sure that you pick a sturdy one or it might lead to unwanted accidents.
Try These Steps
Removing mold from your tongue and groove pine ceiling isn’t as hard as you may think. In fact, you can do it by yourself very easily if you have the right tools and proper guidelines.
To help you achieve that we elaborated all the necessary steps below that you can follow to remove mold from the tongue and groove pine ceiling.
Step 1: Pick a cleaning solution
The first step of removing mold from your wood ceiling is picking a cleaning solution. There are many options when it comes to the cleaning solution for getting rid of molds on the wooden ceiling.
You need to pick one that you think is best suited for the condition of your groove and pine cleaning and your cleaning supplies. Here are some cleaning solutions that you can use for your wooden ceiling;
- Commercial mold remover solution
- Vinegar and water solution
- Detergent, baking soda, and water solution
- Bleach and water solution
- Low percentage hydrogen peroxide
Each of these solution work best for different stages of mold growth on your ceiling. For example, Bleach would only kill the surface level molds. So if the mold growth on your wall is deep and spread out it would be best to use a stronger solution like vinegar or commercial mold remover.
Step 2: Brush your wood ceiling
Use a long broom or duster to get rid of dust or cobwebs. Use a tool or any other similar kind of support to be able to reach the ceiling. Then gradually brush off foreign particles. This step makes the next few steps easier to do and makes sure that there is no extra barrier before the mold surface. As a result, any cleaning solution can directly work on the mold surface.
Step 3: Apply the cleaning solution
Take your chosen solution and apply it all over the ceiling surface using a sponge or a mop. Put the extra solution on the areas that have the most visible molds. Let the solution soak into the wood and keep it that way for a few minutes.
Use a scrubber or a sponge to scrub tough mold spots with the cleaning solution. So that it reaches the mold spores below the surface level. This is important to completely kill all fungus and germs.
Step 4: Clean and dry
After letting the cleaning solution sit for a while wash it off with clean water with a damp cloth. Make sure that you don’t completely soak the wood in water or it might cause damage. After wiping everything down let the ceiling dry down completely before going on to the next step.
Step 5: Sand and polish
If your tongue and groove pine ceiling are unpolished then you can sand the mold concentrated areas to further get rid of the mold. Using sandpaper, liberally sand the area. Don’t sand too much or it might create an uneven surface.
Lastly, polish your tongue and pin ceiling using a wood polish of your choice. This will protect the wood from wear and tear. It will also keep it in a good condition. Follow the instructions at the back of the wood polish to properly polish your ceiling.
And that’s it! If you made it this far then make sure to give a pat on your back. With these few and easy steps, you can remove mold from the tongue and groove pine ceiling all by yourself in no time.
Maintenance
After you are done removing mold from your tongue and groove pine ceiling it is time for you to maintain it. You don’t want molds to regrow on your ceiling after you gave so much effort into it. To make sure that doesn’t happen you need to maintain it properly.
We noted down some maintenance guidelines that you can follow to keep your tongue and groove pine ceiling in good condition.
- Proper ventilation is the key to a mold-free ceiling. Proper ventilation makes sure there isn’t too much moisture in the atmosphere to inhibit any fungal growth. You can use a humidifier for this step.
- Keep the ceiling surface clean. To do so, clean your ceiling now and then with a soap-based solution. You can use a dish washer or detergent mixed with warm water.
If your tongue and groove pine ceiling are unpolished, polish it using a wood polish of your choice.
Conclusion
Hope you found this article helpful. We tried our best to provide you with all the necessary and relevant information that will help you achieve a mold-free ceiling.
If you follow the above-mentioned steps just as we instructed you can achieve a mold-free tongue and groove pin ceiling in no time.
Thank you for being patient and staying with us till the end.
Frequently Asked Questions (FAQ)
Question: Is vinegar or bleach better for killing mold?
Answer: Vinegar is better than bleach for killing mold. Bleach only cleans the surface area. As a result, the mold might grow back. Whereas, vinegar cleans the underneath the surface mold.
Question: Is ceiling mold dangerous?
Answer: Yes, they are dangerous up to an extent. Spores from the black molds can irritate your respiratory system. Especially for people with respiratory problems or other similar problems.
Question: What can I spray on wood to kill mold?
Answer: You can spray several solutions to kill mold. Such as vinegar, bleach, commercial mold killing solution, etc.
You Can Read Also The 5 Best Stain Color For Pine Ceiling